Septic Pumping – Maintenance

Septic Pumping involves a few steps: First of all, finding out where your tank is located. Once you’ve found it, your septic system engineer will usually find the correct lid for your tank. Then, removing the lid is the next step. Checking the liquid level in your tank is a final step in septic pumping. Once the tank has been filled, your septic system engineer will pump the whole tank to see how much liquid there is. Finally, the technician will observe the drain line to determine which direction the drainage is flowing. You may find more details about this at Oxford Septic Pumping.

Once your tank is filled, your septic tank system engineer will remove the valve or other device that controls the flow of the septic fluid from the septic tank into the septic pipe. After he has done this, he will turn on the valve and the fluid will then run through the pipe towards the septic drain. The septic pump will then move the septic fluid through the pipe until it reaches the drain field. This process is called siphoning. It is very important for the septic system to run correctly, because if it’s not running properly, your property will become uninhabitable. If the flow is not correctly controlled, then you can end up with a situation where bacteria start growing in the drain field. As a result, your waste material is unable to drain out of the septic field.

Once the septic system has been successfully installed, you will need to regularly inspect and maintain it. There are several common problems that may need to be dealt with, including: leaks or clogs, slow drains or tank overflow, blockages, etc. Regular inspection is the only way to make sure your system is working correctly and maintaining the right levels of fluid in your tank. Failure to keep up your septic system maintenance can lead to serious problems down the road.

Contact Info

C Mac Septic Service
137 Beck Rd, Oxford, AL 36203
Phone Number: 256-474-8281